Iris Hellas Νέα,φωτοβολταικά,αντλίες θερμότητας LG,net-metering

Iris Hellas

Ικανοποίηση πελατών

Ενεργειακά Συστήματα-Φωτοβολταικά

Iris Hellas Logo
Μετάβαση στο περιεχόμενο

Maxim’s analog IC integrated cell-string optimizer replaces bypass diode limitations

Iris Hellas
Δημοσιεύθηκε από σε Φωτοβολταικά - Διεθνή ·
Tags: Maxim
Maxim Integrated Products has introduced a new cell-string optimizer technology that allows PV panels to harvest significantly more energy and simplifies design complexity for solar installation projects, notably shade mitigation and eliminating hot-spots while minimizing the impact of overall power degradation mechanisms.
Unlike conventional bypass diodes, solar cell optimizers do not bypass weak cell strings. Using bypass diodes in solar a solar panel that experiences shading/soiling at any point within a string limits the maximum current rating to the lowest performing cell in the string.
Maxim's cell-string optimizers are highly integrated DC-DC converters that replace the bypass diode and perform maximum power point tracking (MPPT) of the PV panel (from 6 to 24 cells). By replacing each diode (three) with a MPPT device, the on-off response to performance mismatch is eliminated; every cell-string contributes maximum power without interfering with the power production capability of others. This enhanced degree of flexibility leads to increased energy production; eliminating collateral performance loss due to module mismatch, degradation, soiling, localized shading, and row shading loss mechanisms. A PV system designer can reconfigure a system design to allow for more inter-row shading that is claimed to deliver 10 to 20% more energy density than a conventional system design. Effectively, the system can maintain the same kWh/kWp as a conventional system, but with higher ground coverage ratios. System designers can also accommodate differing string lengths, multiple orientations, and different module power levels.
PV module integrated replacement for bypass diodes.
Maxim solar cell optimizer works by boosting the current of the weak cells to match those of the stronger, eliminating the corresponding performance penalty of the conventional system. The solar cell optimizer’s MPPT function works alongside the string inverter MPPT, to ensure that the system output is optimal under any environmental conditions. The module includes three Maxim solar cell optimizers, which replace the three diodes found in a conventional module junction box.
September, 2016 onwards.
More info:

Iris Hellas,  Δωδεκανήσου 40, 567 28, Θεσσαλονίκη. Τηλ.:+30 2310 809414  email: [email protected]
Επιστροφή στο περιεχόμενο